Phrozen Water-Washable Resin

Phrozen Water-Washable Resin

Regular price$50.75
/
Shipping calculated at checkout.

  • Worldwide shipping
  • Low stock - 3 items left
  • Inventory on the way

Designed to be easily cleaned by water, Phrozen’s Water-Washable Resins are sturdy, durable, and print with speed.

Customized for a 405nm LCD printer, the Water-Washable Resin takes only 7 seconds for cure time using the Shuffle XL and 1.5 seconds using Phrozen’s Sonic printers.

This resin works best for printing 3D figurines as well as product prototypes.

Weight: Model Gray 1KG per bottle
XY Resolution: 30 µm
Recommended Layer Height: 30-100 um
Ways to Rinse: Clean with water & spray with air gun. 
Viscosity: 125 cps 
Proportion: 1.05
Tg:60 °C
Elongation: 24 %
Break Value: 12 MPa
Surface Hardness: Shore 77D
I-Zod Impact:3.04 KJ/m2

  • Use and preserve resins in room temperature, dark, and ventilated condition.
  • Shake well before use.
  • After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
  • Keep resin away from kids and away from direct sun-light exposure.
  • Wear gloves and masks when using resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
  • DO NOT dump resin. Please cure it and treat it as general plastic garbage.
  • After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year

    *IMPORTANT* All prevailing tax/VAT will not be included during checkout, pls ensure that you understand your tax/VAT requirements

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    You may also like


    Recently viewed